Juniper QFabric QFX3008-I, Manual, Page: 60 / 472

management of your data center using the Junos OS command-line interface (CLI) or
Junos Space. See Understanding the QFabric Switch Control Plane.
•
Software on page 34
• Chassis Physical Specifications, Front Panel Display, and Midplane on page 34
• 16-Port QSFP+ Front Card on page 36
•
Control Board on page 37
•
Rear Card on page 37
• Cooling System on page 37
• Power Supplies and Wiring Trays on page 37
Software
QFX Series devices run under the Juniper Networks Junos OS, which provides Layer 2 and
Layer 3 switching, routing, and security services. The same Junos OS code base that runs
on QFX Series devices also runs on all Juniper Networks EX Series switches, and J Series,
M Series, MX Series, and T Series routers.
Chassis Physical Specifications, Front Panel Display, and Midplane
The QFX3008-I Interconnect device is 21 rack units (21 U) in size (1/2 rack) and designed
to fit in industry-standard 19-inch rack-mount enclosures. See
Figure 16 on page 35 , Figure
17 on page 36 , and “Chassis Physical Specifications for a QFX3008-I Interconnect Device”
on page 41 .
Copyright © 2012, Juniper Networks, Inc. 34
QFX3000 Hardware Documentation