Juniper QFabric QFX3008-I, Manual, Page: 422 / 472

Figure 136: AC Three-Phase Wiring Tray LEDs on a QFX3008-I Interconnect
Device
g050161
Status LEDs
Table 78 on page 396 describes the LEDs on an AC wiring tray.
Table 78: AC Wiring Tray LEDs on a QFX3008-I Interconnect Device
Description State LED
Indicates one of the following:
• Wiring tray is disconnected from power feed.
•
AC power input voltage is not within normal
operating range.
• No AC power input.
Unlit Power (Phase 1 , 2 , or 3 )
• AC power input voltage is within normal operating
range. Green
Related
Documentation
•
AC Power Specifications for a QFX3008-I Interconnect Device with Single-Phase
Wiring Trays on page 137
•
Power Requirements for a QFX3008-I Interconnect Device on page 139
•
Connecting AC Power to a QFX3008-I Interconnect Device with Single-Phase Wiring
Trays on page 239
Copyright © 2012, Juniper Networks, Inc. 396
QFX3000 Hardware Documentation