Juniper QFabric QFX3008-I, Manual, Page: 410 / 472

NOTE: In most cases, when the QFX3100 Director device is configured as
part of a QFabric switch, the link speed will be 1000 Mbps.
Table 69: Network Module Port LEDs on a QFX3100 Director Device
Description State Color LED
The port is not active, or there is no power to the
network module. Unlit Off Link/Activity
The port and the link are active, but there is no
link activity. On steadily Green
The port and the link are active, and there is link
activity. Flickering
10 Mbps or there is no power to the network
module. Unlit Off Speed
100 Mbps. On steadily Green
1000 Mbps. On steadily Amber
Related
Documentation
Front Panel of a QFX3100 Director Device on page 26
•
•
Installing and Connecting a QFX3100 Director Device on page 213
AC Power Supply LED on a QFX3100 Director Device
An AC power supply has one bicolored power supply status LED on its faceplate. This
LED displays information about the status of the power supply. See
Figure 129 on page 384 .
Figure 129: AC Power Supply LEDs on a QFX3100 Director Device
g020955
AC Power supply
status LED
Ejector lever
Table 70 on page 385 describes the power supply status LED on an AC power supply in a
QFX3100 Director device.
Copyright © 2012, Juniper Networks, Inc. 384
QFX3000 Hardware Documentation