background image

Juniper NS-5400 Security Policy 

 

 

2

Copyright Notice 

Copyright © 2005 Juniper Networks, Inc. May be reproduced only in its original entirety [without revision].

 

Juniper Networks, the Juniper Networks logo, NetScreen, NetScreen Technologies, GigaScreen, and the NetScreen logo 
are registered trademarks of Juniper Networks, Inc. NetScreen-5GT, NetScreen-5XP, NetScreen-5XT, NetScreen-25, 
NetScreen-50, NetScreen-100, NetScreen-204, NetScreen-208, NetScreen-500, NetScreen-5200, NetScreen-5400, 
NetScreen-Global PRO, NetScreen-Global PRO Express, NetScreen-Remote Security Client, NetScreen-Remote VPN 
Client, NetScreen-IDP 10, NetScreen-IDP 100, NetScreen-IDP 500, GigaScreen ASIC, GigaScreen-II ASIC, and 
NetScreen ScreenOS are trademarks of Juniper Networks, Inc. All other trademarks and registered trademarks are the 
property of their respective companies.

 

FCC Statement

 

The following information is for FCC compliance of Class A devices: This equipment has been tested and found to comply 
with the limits for a Class A digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide 
reasonable protection against harmful interference when the equipment is operated in a commercial environment. The 
equipment generates, uses, and can radiate radio-frequency energy and, if not installed and used in accordance with the 
instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential 
area is likely to cause harmful interference, in which case users will be required to correct the interference at their own 
expense.

 

The following information is for FCC compliance of Class B devices: The equipment described in this manual generates 
and may radiate radio-frequency energy. If it is not installed in accordance with NetScreen’s installation instructions, it 
may cause interference with radio and television reception. This equipment has been tested and found to comply with the 
limits for a Class B digital device in accordance with the specifications in part 15 of the FCC rules. These specifications 
are designed to provide reasonable protection against such interference in a residential installation. However, there is no 
guarantee that interference will not occur in a particular installation.

 

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the 
equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

 

Reorient or relocate the receiving antenna. 

Increase the separation between the equipment and receiver. 

Consult the dealer or an experienced radio/TV technician for help. 

Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. 

Caution:

 Changes or modifications to this product could void the user's warranty and authority to operate this device. 

Disclaimer

 

THE SOFTWARE LICENSE AND LIMITED WARRANTY FOR THE ACCOMPANYING PRODUCT ARE SET FORTH IN 
THE INFORMATION PACKET THAT SHIPPED WITH THE PRODUCT AND ARE INCORPORATED HEREIN BY THIS 
REFERENCE. IF YOU ARE UNABLE TO LOCATE THE SOFTWARE LICENSE OR LIMITED WARRANTY, CONTACT 
YOUR NETSCREEN REPRESENTATIVE FOR A COPY.

 

Summary of Contents for NS-2G24FE


















Reviews: