Juniper NFX150, Hardware Manual

Page: 72 / 152

•
Phillips (+) screwdriver, number 2
• 2 mounting brackets and 8 mounting screws (provided in the accessory box shipped
with the device)
•
Screws to secure the chassis to the rack (not provided)
NOTE: One person must be available to lift the device while another secures
the device to the rack.
CAUTION: If you are mounting multiple devices on a rack, mount a device in
the bottom of the rack first and proceed to mount the rest of the devices
from bottom to top.
To mount the device on two posts in a rack:
1.
Place the device on a flat, stable surface.
2.
Align the mounting brackets along the front, rear, or center of the side panels of the
device chassis depending on how you want to mount the device. For example, if you
want to front-mount the device, align the brackets along the front of the side panel.
See
Figure 28 on page 72 .
Figure 28: Attaching the Mounting Bracket to the Side Panel of the Device
g100013
NOTE: If you need to mount the device in a recessed position, use the
2-in.-recess front mount brackets from the separately orderable four-post
rack-mount kit.
3.
Align the bottom holes in the mounting brackets with holes on the side panels of the
device chassis.
4.
Insert mounting screws into the aligned holes. Tighten the screws.
5.
Ensure that the other holes in the mounting brackets are aligned with the holes in the
side panels. Insert a screw in each hole and tighten the screws.
Copyright © 2018, Juniper Networks, Inc. 72
NFX150 Network Services Platform Hardware Guide