NetScreen-5XT
v
Preface
The Juniper Networks NetScreen-5XT provides IPSec VPN and firewall services for a
broadband telecommuter, a branch office, or a retail outlet. While at the entry level of the
NetScreen appliance product line, the NetScreen-5XT uses the same firewall, VPN, and
traffic management technology as NetScreen’s high-end central site products.
Juniper Networks offers two versions of the NetScreen-5XT:
•
The 10-user version supports up to 10 users
•
The Elite version supports an unrestricted number of users
G
UIDE
O
RGANIZATION
This manual has three chapters and one appendix.
Chapter 1,
provides an overview of the NetScreen-5XT, ports, and power
requirements.
Chapter 2,
details how to install the NetScreen-5XT on a desktop,
connect the power, and connect the device to your network.
Chapter 3,
details how to establish a Console session, set an IP
address for managing the NetScreen-5XT, and access it using the WebUI.
Appendix A,
provides a list of physical specifications about the NetScreen-
5XT.
C
OMMAND
L
INE
I
NTERFACE
(CLI) C
ONVENTIONS
The following conventions are used when presenting the syntax of a command line
interface (CLI) command:
•
Anything inside square brackets [ ] is optional.
•
Anything inside braces { } is required.
•
If there is more than one choice, each choice is separated by a pipe ( | ). For
example,
set interface { ethernet1 | ethernet2 | ethernet3 }
manage
means “set the management options for the ethernet1, ethernet2, or ethernet3
interface”.
•
Variables appear in italic. For example:
set admin user name1 password xyz
