Juniper NetScreen-25, User Manual

Page: 6 / 36

Preface
vi User’s Guide
&
200$1'
/
,1(
,
17(5)$&(
&/,&
219(17,216
The following conventions are used when presenting the syntax of a command line
interface (CLI) command:
• Anything inside square brackets [ ] is optional.
• Anything inside braces { } is required.
• If there is more than one choice, each choice is separated by a pipe ( | ). For
example,
set interface { ethernet1 | ethernet2 | ethernet3 }
manage
means “set the management options for the ethernet1, ethernet2, or ethernet3
interface”.
• Variables appear in italic. For example:
set admin user name password
When a CLI command appears within the context of a sentence, it is in bold (except for
variables, which are always in italic). For example: “Use the get system command to
display the serial number of a NetScreen device.”
-
81,3(5
1
(7:25.6
1
(7
6
&5((1
3
8%/,&$7,216
To obtain technical documentation for any Juniper Networks NetScreen product, visit
www.netscreen.com/resources/manuals/ .
To obtain the latest software version, visit: www.netscreen.com/services/download_soft .
Select a category of software product from the dropdown list, then follow the displayed
instructions. (You must be a registered user to download Juniper Networks Netscreen
software.)
If you find any errors or omissions in the following content, please contact us at the e-mail
address below:
techpubs@netscreen.com
Note: When typing a keyword, you only have to type enough letters to identify the word
uniquely. For example, typing set adm u joe j12fmt54 is enough to enter the command
set admin user joe j12fmt54. Although you can use this shortcut when entering
commands, all the commands documented here are presented in their entirety.