Juniper MX480, Hardware Manual, Page: 170 / 420

See Connecting the MX480 Router to Management and Alarm Devices .
7.
Connect the grounding cable.
See “Grounding the MX480 Router” on page 204 .
8.
Connect the power cables.
•
Connecting Power to an AC-Powered MX480 Router with Normal-Capacity Power
Supplies on page 205
• Connecting Power to a DC-Powered MX480 Router with Normal Capacity Power
Supplies on page 207
9.
Power on the router.
• Powering On an AC-Powered MX480 Router on page 206
• Powering On a DC-Powered MX480 Router with Normal Capacity Power Supplies
on page 210
10.
Perform the initial system configuration.
See “Initially Configuring the MX480 Router” on page 220 .
Unpacking the MX480
•
Tools and Parts Required to Unpack the MX480 Router on page 170
•
Unpacking the MX480 Router on page 170
• Verifying the MX480 Router Parts Received on page 172
Tools and Parts Required to Unpack the MX480 Router
To unpack the router and prepare for installation, you need the following tools:
• Phillips (+) screwdriver, number 2
• 1/2-in. or 13-mm open-end or socket wrench to remove bracket bolts from the shipping
pallet
•
Blank panels to cover any slots not occupied by a component
Unpacking the MX480 Router
The router is shipped in a wooden crate. A wooden pallet forms the base of the crate.
The router chassis is bolted to this pallet. Quick Start installation instructions and a
cardboard accessory box are also included in the shipping crate.
The shipping container measures 21 in. (53.3 cm) high, 23.5 in. (60.0 cm) wide, and
32.5 in. (82.5 cm) deep. The total weight of the container containing the router and
accessories can range from 93 lb (42.2 kg) to 169 lb (76.7 kg).
Copyright © 2019, Juniper Networks, Inc. 170
MX480 Universal Routing Platform Hardware Guide