Figure 76: 6-AWG DC Power Cable Lug
g007468
0.63 ±.02
.27 ±.02
2 PLC
.48 ±.04
End view
Inner diameter .22
.25 ±.04
All measurements in inches
CAUTION:
Before router installation begins, a licensed electrician must attach a cable
lug to the grounding and power cables that you supply. A cable with an incorrectly
attached lug can damage the router.
CAUTION:
The router is a pluggable type A equipment installed in restricted access
location. It has a separate protective earthing terminal (Metric [–M6] and English
[–¼-20] screw ground lugs) provided on the chassis in addition to the grounding pin
of the power supply cord. This separate protective earth terminal must be permanently
connected to earth.
summarizes the specifications for the DC power cables, which you must supply.
Table 75: DC Power Cable Specifications
Quantity and Specification
Cable Type
Eighteen pairs of 4-AWG (21.2 mm
2
), used with 80-A PDM. Minimum
90°C wire, or as required by the local code.
Power
Eighteen pairs of 6-AWG (13.3 mm
2
), used with 80-A PDM. Minimum
90°C wire, or as required by the local code.
CAUTION:
You must ensure that power connections maintain the proper polarity.
The power source cables might be labeled (+) and (–) to indicate their polarity. There
is no standard color coding for DC power cables. The color coding used by the external
DC power source at your site determines the color coding for the leads on the power
cables that attach to the terminal studs on each PDM.
210
Summary of Contents for MX2010
