Juniper MX2010, Hardware Manual

Page: 191 / 825

Table 53: MX2010 FRU AC Power Requirements (continued)
Maximum Power Requirement Model Number Component
41 W MIC-3D-40GE-TX Tri-Rate MIC
•
When installed into MPC8E:
1.250 A @ 48 V (60 W)
•
When installed into MPC9E:
1.771 A @ 48 V (85 W)
MIC-MRATE MIC MRATE
36 W at 55° C
35 W at 40° C
34 W at 25° C
MIC-3D-8DS3-E3
MIC-3D-8CHDS3-E3-B
DS3/E3 MIC
33.96 W MIC-3D-4COC3-1COC12-CE Channelized OC3/STM1
(Multi-Rate) Circuit Emulation
MIC with SFP
RELATED DOCUMENTATION
MX2010 Power System Description | 95
Connecting AC Power to an MX2000 Router with Three-Phase Delta AC Power Distribution
Modules | 291
Connecting AC Power to an MX2000 Router with Three-Phase Wye AC Power Distribution
Modules | 295
Connecting Power to an MX2000 Single-Phase AC Power Distribution Module | 300
MX2000 AC Power Cord Specifications | 170
MX2000 AC Power Cord Specifications
Most sites distribute power through a main conduit that leads to frame-mounted power distribution panels,
one of which can be located next to the rack that houses the router. An AC power cord connects each
power distribution module (PDM) to the power distribution panel. Detachable AC power cords are supplied
with the router. For single–phase PDMs, the coupler type is C21. For three-phase power, the power cord
wires are inserted into the AC input terminal with the help of a screwdriver. The plug end of the power
cord fits into the power source receptacle for your geographical location.
170