Juniper MX2010, Hardware Manual, Page: 101 / 825

MX Series MPC Overview
MIC/MPC Compatibility
MX Series MIC Overview
MICs Supported by MX Series Routers | 79
Junos Continuity Software Overview
Pathfinder: Hardware Supported by Junos Continuity Software
MX2010 MPC Terminology
Regardless of whether you are holding an MPC vertically or horizontally, this information uses the same
terms for all four edges of the MPC (see Figure 30 on page 78 ):
•
Faceplate—Edge of the MPC that has connectors into which you insert the SFP or XFP transceivers
•
Connector edge—Edge opposite the faceplate; this edge has the connectors that attach to the midplane
•
Top edge—Edge at the top of the MPC when it is vertical
•
Bottom edge—Edge at the bottom of the MPC when it is vertical
Figure 30: MPC Edges
78