Juniper MX10016, Hardware Manual

Page: 108 / 320

Table 40: JNP10K-PWR-AC2 Power Cable Specifications for 20-A Input (continued)
Graphic
Spare Juniper
Model Number Plug Standards Cord Set Rating Locale
CBL-JNP-SG4-SZ CEI 23-50 16 A, 250 VAC Switzerland
JNP10K-PWR-AC2 Power Cable Specifications for 30-A Input
The JNP10K-PWR-AC2 HVAC or HVDC power supplies requires a high current cable assembly when set
for 30-A input. One end of the cable has an Anderson APP-400 connector, the other end of the cable is
bare wire. See Figure 41 on page 110 and Table 41 on page 111 . These cables are separately orderable and
are not shipped automatically with JNP10K-PWR-AC2 orders. An example of the right-angle cable and
connector is shown in Figure 43 on page 111 .
For connection to AC systems, Juniper provides a cable with either a NEMA 30-A connector
( Figure 41 on page 110 ) or an IEC 330P6W connector ( Figure 42 on page 110 ).
Figure 41: NEMA 30-A Connector
g100610
Figure 42: IEC 330P6W Connector
g100616
110