Juniper MX10008, Hardware Manual

Page: 276 / 361

WARNING: To prevent injury, keep your back straight and lift with your legs, not
your back. Do not twist your body as you lift. Balance the load evenly and be sure
that your footing is firm.
3. Position one person on each side and another in the rear of the chassis. There are two handles on the
side, but these handles are only meant to help guide the empty chassis out of the base and rear brackets.
4. On each side, hold the bottom of the chassis and carefully lift it up from the base and rear brackets on
the four-post rack.
5. Carefully lift it out of the rack. If you have a pallet jack, move the router onto the pallet jack. See
Figure 161 on page 278 .
Figure 161: Lifting the MX10008 Without Using a Mechanical Lift
g009478
6. Carefully move the chassis to its new location.
After moving the router to its new location, reinstall the components in the chassis or store the
components in electrostatic bags.
278