Juniper LN1000 - RELEASE NOTES 8-27-2010, User Manual

Page: 56 / 64

You access submenus by entering the abbreviated menu name. For example, to enter
the Flags menu, from the Diagnostic CLI menu interface enter the
flags
command.
To return to a higher level menu, press
Ctrl-U
.
To exit the Diagnostic Menu Interface, press Ctrl-X to return to the Bootstrap prompt
from any menu level.
All diagnostic commands available from the Diagnostic CLI menu interface are available
from the bootstrap prompt for scripting. Diagnostic test execution is the same either
when run from the CLI Diagnostic menu or using test scripting, and results are output to
the console port and diagnostic log.
Using command scripting, you can create a sequence of diagnostic commands and flags.
Command sequences are terminated by a carriage return.
For example, to perform a fast memory test on 1000 bytes starting at address 0, at the
bootstrap prompt enter the
diags board memory fast 0 1000
command. This command
is equivalent to entering the Diagnostic CLI menu interface, navigating to the Board Menu,
and then to the Memory menu and executing the fast memory test.
Related
Documentation
SPOST and POST Diagnostic Tests on page 35
•
•
Powering On the LN1000 Mobile Secure Router on page 25
•
LN1000 Router Power Requirements on page 13
LN1000 Mobile Secure Router Status LED
Upon initial power-on, the components of the router run boot code, go through a series
of self-diagnostic tests, and synchronize with each other. When the tests are complete,
use the LED on the router front panel to determine the status of the router.
Table 6: LN1000 Router LED Status
Meaning Color
Power is off. Off; No color
Error condition. Steady Red
Ready for operation. The router is powered on and has successfully booted and run
SPOST and POST diagnostics. Steady Green
Powering on and then running SPOST and POST diagnostics, or running individual
diagnostics, or performing an upgrade. Blinking Green
Related
Documentation
Accessing the Extended Diagnostic Tests on page 41
•
•
SPOST and POST Diagnostic Tests on page 35
•
LN1000 Router Power Requirements on page 13
42
LN1000 Mobile Secure Router