Juniper JUNOS OS 10.4, Supplementary Manual

Page: 905 / 6804

Contents
<mpls>
—Ping label-switched path
<vpls> —Ping VPLS MAC address
<count>
—Number of ping requests to send
<wait> —Delay after sending last packet
<no-resolve> —Don't attempt to print addresses symbolically
<rapid>
—Send requests rapidly (default count of 5)
<record-route> —Record and report packet's path (IPv4)
<detail>
—Display incoming interface of received packet
<do-not-fragment> —Don't fragment echo request packets (IPv4)
<loose-source>
—Intermediate loose source route entry (IPv4)
<interface> —Source interface (multicast, all-ones, unrouted packets)
<interval>
—Delay between ping requests
<source>
—Source address of echo request
<pattern> —Hexadecimal fill pattern
<size>
—Size of request packets
<strict> —Use strict source route option (IPv4)
<strict-source>
—Intermediate strict source route entry (IPv4)
<ttl> —IP time-to-live value (IPv6 hop-limit value)
<verbose>
—Display detailed output
<tos> —IP type-of-service value
<bypass-routing>
—Bypass routing table, use specified interface
<inet>
—Force ping to IPv4 destination
<inet6> —Force ping to IPv6 destination
<routing-instance>
—Routing instance for ping attempt
<host> —Hostname or IP address of remote host
<logical-system>
—Name of logical system
<request-ping-ethernet> —Ping to an ethernet host by unicast mac address
669 Copyright © 2010, Juniper Networks, Inc.
Chapter 2: Summary of Operational Request Tag Elements