Juniper JSA3800, Hardware Manual, Page: 46 / 92

17.
To configure the JSA root password:
a. Type a new password.
b. Select Next and then press Enter . The Confirm New Root Password window
appears.
c. Reenter your new password to confirm, and select
Finish
.
A series of messages appears as JSA continues with the installation; this process
takes from three to five minutes. When the JSA installation process is complete,
the message window appears.
18.
Press Enter and select OK to complete the installation.
You are now ready to access JSA. For more information, see “Accessing the JSA
Interface” on page 46 .
19.
Type exit and press Enter .
See Also Accessing the JSA Interface on page 46
•
•
JSA3800 Appliance Physical Specifications on page 26
•
Connecting the JSA3800 Appliance to a Management Device on page 43
Accessing the JSA Interface
Purpose To access a Juniper Secure Analytics (JSA) interface:
Action Open your Web browser.
1.
NOTE: JSA supports the following browsers:
•
32-bit Microsoft Internet Explorer, with document mode and browser
mode enabled - 8.0 and 9.0
•
Mozilla Firefox - 17.0 ESR and 24.0 ESR
NOTE: Because of Mozilla’s short release cycle, we cannot
commit to testing on the latest versions of the Mozilla Firefox
Web browser. However, we are fully committed to
investigating any issues that are reported.
•
Google Chrome - Latest version
2.
Log in to JSA:
https://<IP Address>
Copyright © 2019, Juniper Networks, Inc. 46
Juniper Secure Analytics 3800 Hardware Guide