Juniper JSA3800, Hardware Manual, Page: 18 / 92

•
Automatic RAID rebuild on HDD swap
• Support hot-swappable dual-AC (or optional dual-DC power supplies) with a redundant
configuration in the chassis
The JSA appliances use the following drivers for security analysis of external and internal
threats:
•
Security Information Management (SIM)—SIM provides reporting and analysis of data
from host systems, applications, and security devices to support security policy
compliance management, internal threat management, and regulatory compliance
initiatives.
•
Security Event Management (SEM)—SEM improves security incident response
capabilities by processing data from security devices and network devices. It helps
network administrators to provide effective responses to external and internal threats.
See Also JSA3800 Appliance Front Panel Description on page 19
•
•
JSA3800 Appliance Back Panel Description on page 21
JSA3800 Appliance Transceiver Interface
Table 3 on page 18 lists the transceivers supported on the JSA3800 appliance.
Table 3: JSA3800 Appliance Transceiver Interface Types
Description Card Model Transceiver Type
Dual Rate 10GBASE-LR/1000BASE-LX UNIV-SFPP-DUAL-SR SFP+
Dual Rate 10GBASE-SR/1000BASE-SX UNIV-SFPP-DUAL-LR
See Also JSA3800 Appliance Description on page 17
•
•
JSA3800 Appliance Back Panel Description on page 21
•
JSA3800 Appliance Physical Specifications on page 26
Field-Replaceable Units on the JSA3800 Appliance
Field-replaceable units (FRUs) are hardware components that can be replaced at the
customer site. Hot-swappable FRUs are the components that you can remove and replace
without powering off the device or disrupting the functions of the device.
Hot-swappable FRUs supported by the JSA3800 appliance are the raid array and power
supply.
See Also Replacing AC Power Supply Cables on the JSA3800 Appliance on page 51
•
•
Replacing an AC Power Supply on the JSA3800 Appliance on page 51
Copyright © 2019, Juniper Networks, Inc. 18
Juniper Secure Analytics 3800 Hardware Guide