Juniper JRR200, Hardware Manual

Page: 34 / 108

JRR200 Rack and Cabinet Requirements
•
JRR200 Route Reflector Rack Requirements on page 34
•
JRR200 Route Reflector Cabinet Requirements on page 34
JRR200 Route Reflector Rack Requirements
The JRR200 Route Reflector is designed to be installed on four-post racks.
Table 18 on page 34 provides the rack requirements and specifications for the route
reflector.
Table 18: Rack Requirements
Guidelines Rack Requirement
Use a four-post rack that provides bracket holes or hole patterns spaced
at 1 U (1.75 in. or 4.45 cm) increments and that meets the size and strength
requirements to support the weight.
A U is the standard rack unit defined in Cabinets, Racks, Panels, and
Associated Equipment (document number EIA-310–D) published by the
Electronics Industry Association (
http://www.eia.org ).
Rack type
The holes in the mounting brackets are spaced at 1 U (1.75 in. or 4.45 cm),
so that the device can be mounted in any rack that provides holes spaced
at that distance. Mounting bracket
hole spacing
• Ensure that the rack complies with the size and strength standards of
a 19-in. rack as defined in Cabinets, Racks, Panels, and Associated
Equipment (document number EIA-310–D) published by the Electronics
Industry Association (
http://www.eia.org ).
• The rack must be strong enough to support the weight of the JRR200
route reflector.
•
Ensure that the spacing of rails and adjacent racks provides for proper
clearance around the JRR200 route reflector and rack.
Rack size and
strength
• Secure the rack to the building structure.
• If earthquakes are a possibility in your geographical area, secure the
rack to the floor.
• Secure the rack to the ceiling brackets as well for maximum stability.
Rack connection to
building structure
JRR200 Route Reflector Cabinet Requirements
You can install the JRR200 Route Reflector in a 19 in. (48.7 cm) cabinet.
Table 19 on page 35 provides the cabinet requirements and specifications.
Copyright © 2018, Juniper Networks, Inc. 34
JRR200 Route Reflector Hardware Guide