Initial Configuration Process
g100041
Verifying the
Settings
Connecting the
Management
Device
Configuring a
JATP700
Appliance
Powering On
the Device
Step 1: Powering On the Appliance
CAUTION:
Before connecting the appliance to the power supply, attach an ESD strap to an ESD point and place the
other end of the strap around your bare wrist.
1.
Plug the power cord into the AC receptacle on the rear panel.
If your appliance contains two power supplies, plug a power cord into each of the AC receptacle.
NOTE:
Grounding for the appliances is provided through the power supply ground terminal. Ensure that you
connect the AC power supply module in the appliance to a grounded AC power outlet by using an AC power cord
(with the grounding pin) appropriate for your geographical location.
2.
Plug the other end of the power cord into a wall socket.
3.
Press the Power button on the front panel.
4.
Note the following indications:
g000611
Power button
Reset button
LEDs
Power
HDD
GLAN1
Information
GLAN2
Alert/Power fail
3
Copyright © 2018, Juniper Networks, Inc.
How to Set Up Your JATP700 Appliance
