Juniper J4350, Getting Started Manual

Page: 61 / 284

Physical Interface Modules Overview
Fast Ethernet LEDs indicate link status, port speed, and activity. Table 20
describes the meaning of the LEDs.
Table 20: LEDs for Dual-Port Fast Ethernet PIM
Label Color State Description
Green (100 Mbps)
Yellow (10 Mbps)
On steadily Online and link is active. LINK/SPEED
Red Disconnected Link is unavailable.
Green Blinking Online with network traffic. ACTIVITY
Green
On steadily Online without traffic.
4-Port Fast Ethernet ePIM
You can install 4-Port Fast Ethernet ePIMs in any of the high-speed slots, as follows:
J4350—Install up to two 4-Port Fast Ethernet ePIMs in slots 3 and 6.
J6350—Install up to four 4-Port Fast Ethernet ePIMs in slots 2, 3, 5, and 6.
NOTE: For 4-port Fast Ethernet ePIMs, if you apply a CoS scheduler map on outgoing
(egress) traffic, the router does not divide the bandwidth appropriately among the
CoS queues. As a workaround, configure enforced CoS shaping on the ports.
The 4-Port 10/100-Mbps Fast Ethernet ePIM, shown in Figure 19, has
four physical Fast Ethernet ports.
Figure 19: 4-Port Fast Ethernet ePIM
4x10/100
0
1
2
3
g003854
Field-Replaceable PIMs
41