Juniper J4350, Getting Started Manual

Page: 224 / 284

J4350 and J6350 Services Router Getting Started Guide
Keep the area around the chassis clear and free from dust before, during,
and after installation.
Keep tools away from areas where people could trip over them while walking.
Do not wear loose clothing or jewelry, such as rings, bracelets, or chains, which
could become caught in the chassis.
Wear safety glasses if you are working under any conditions that could be
hazardous to your eyes.
Do not perform any actions that create a potential hazard to people or make
the equipment unsafe.
Never attempt to lift an object that is too heavy for one person to handle.
Never install or manipulate wiring during electrical storms.
Never install electrical jacks in wet locations unless the jacks are specifically
designed for wet environments.
Operate the Services Router only when it is properly grounded.
The separate protective earthing terminal provided on this product shall be
permanently connected to earth.
Replace fuses only with fuses of the same type and rating.
Do not open or remove chassis covers or sheet metal parts unless instructions
are provided in this manual. Such an action could cause severe electrical shock.
Do not push or force any objects through any opening in the chassis frame.
Such an action could result in electrical shock or fire.
Avoid spilling liquid onto the Services Router chassis or onto any Services
Router component. Such an action could cause electrical shock or damage
the Services Router.
Avoid touching uninsulated electrical wires or terminals that have not been
disconnected from their power source. Such an action could cause electrical
shock.
In addition, observe the warnings and guidelines in the following sections.
Qualified Personnel Warning
WARNING: Only trained and qualified personnel should install or replace the
Services Router.
Waarschuwing Installatie en reparaties mogen uitsluitend door getraind en bevoegd
personeel uitgevoerd worden.
204
Safety Guidelines and Warnings