Installing J4350 or J6350 Services Routers
To install a J4350 or J6350 Services Router in a rack:
1.
Make sure the rack is properly secured to the building in its permanent location.
2.
Attach a screw to each rack rail in the third hole down from where you want the
top of the router to be positioned, as shown in Figure 5 on page 8. Screw only
part way in, leaving about 1/4 in. (6 mm) distance between the screw head and
the rail.
3.
Lift the router and insert the elliptical openings in the mounting brackets onto
the partially inserted screws so that the router is hanging from the two screws.
Figure 5: Hanging the Router in the Rack
4.
Install at least two mounting screws into each mounting bracket, in addition to
the center screws from which the router hangs.
Connecting Power to a Services Router
J2300, J2320, J2350, and J4350 Services Routers have a fixed power supply. J6350
Services Routers have field-replaceable AC or DC power supplies.
To connect AC or DC power:
1.
Connect the router to earth ground with a 14 AWG grounding cable:
a.
Connect one end to a proper earth ground point (the rack, for example).
b.
Remove the screw and washer from the PEM nut on the protective earthing
terminal at the rear of the router chassis. (The J4350 and J6350 chassis have
two PEM nuts.)
8
■
Connecting Power to a Services Router
J-series™ Services Router Quick Start
