USB CABLES
USB Type-C to Type-C – Recommended for use
as primary charging cable. Use when device is
powered ON and charging at same time.
USB 3.0 A to Type-C – Legacy Cable; for
charging when receiver is powered OFF.
HARDWARE RESET
This device has a hardware reset function. To
operate, press and hold the power button:
Soft Reset – Press and hold 5 seconds; release
when the green LED flashes slowly. This will
reset all messages to the default state and clear
the almanac.
Factory Reset – Press and hold 15 seconds;
release when the green LED flashes fast. This
will reset all messages to the default state, clear
the almanac, ephemeris, and real-time clock.
Geode Connect
™
for iPhone
®
, iPad
®
, Android
™
,
Windows PC, and is available on the App
Store
®
, Google Play, and www.junipersys.com/
support/geode/downloads.
Geode and Geode Connect are trademarks
of Juniper Systems, Inc. iPhone and iPad are
trademarks of Apple Inc., registered in the U.S.
and other countries and regions. App Store is
a service mark of Apple Inc. Android, Google
Play, and the Google Play logo are trademarks
of Google LLC. Windows is a trademark of
Microsoft Corporation. Bluetooth is a trademark
of Bluetooth SIG, Inc.
Use of the Made for Apple badge means that
an accessory has been designed to connect
specifically to the Apple product(s) identified
in the badge, and has been certified by
the developer to meet Apple performance
standards. Apple is not responsible for the
operation of this device or its compliance with
safety and regulatory standards.
CHARGE BATTERY
Four to six hours before first use
DOWNLOAD THE GEODE USER MANUAL
www.junipersys.com/support/geode/documentation