Juniper EX9208, Hardware Manual, Page: 81 / 396

This topic describes:
•
Line Card Models on page 57
•
Line Card Components on page 58
Line Card Models
Table 26 on page 57 shows the model number, description of the line card model, and
the Junos OS release in which the line card was first supported.
Table 26: EX9200-6QS Line Card
Junos OS Release Required Description Model
14.2R1 or later
CAUTION: Junos OS Release 14.2R1
supports the EX9200-6QS line card
except for one specific configuration. See
the
Junos OS 14.2R2 Release Notes
for
Known Issue PR1068396 to determine
whether that configuration applies to your
switch and which release to use if the
configuration does apply.
A line card with six 40-Gigabit
Ethernet ports, each of which can
house 40-gigabit quad small
form-factor pluggable plus (QSFP+)
transceivers; and 24 10-Gigabit
Ethernet ports, each of which can
house 10-gigabit small form-factor
pluggable (SFP+) transceivers EX9200-6QS
See Figure 26 on page 57 .
Figure 26: EX9200-6QS Line Card
4— 1— 10-Gigabit Ethernet ports Ejector lever
5— 2— LEDs for the 40-Gigabit Ethernet ports Line card LED
6— 3— 40-Gigabit Ethernet ports LEDs for the 10-Gigabit Ethernet ports
You can use the
show version
command to see the version of Junos OS for EX Series
switches loaded on the switch.
57 Copyright © 2017, Juniper Networks, Inc.
Chapter 5: Line Cards