Juniper EX9208, Hardware Manual, Page: 362 / 396

Advarsel Unngå utsettelse for stråling, og stirr ikke inn i åpninger som er åpne,
fordi usynlig stråling kan emiteres fra portens åpning når det ikke er tilkoblet
en fiberkabel.
Aviso Dada a possibilidade de emissão de radiação invisível através do orifício
da via de acesso, quando esta não tiver nenhum cabo de fibra conectado,
deverá evitar a exposição à radiação e não deverá olhar fixamente para
orifícios que se encontrarem a descoberto.
¡Atención! Debido a que la apertura del puerto puede emitir radiación invisible
cuando no existe un cable de fibra conectado, evite mirar directamente a las
aperturas para no exponerse a la radiación.
Varning! Osynlig strålning kan avges från en portöppning utan ansluten
fiberkabel och du bör därför undvika att bli utsatt för strålning genom att inte
stirra in i oskyddade öppningar.
Related
Documentation
General Safety Guidelines and Warnings on page 317
•
•
Laser and LED Safety Guidelines and Warnings for Switches on page 338
•
Installation Instructions Warning on page 325
•
Grounded Equipment Warning on page 335
•
Laser and LED Safety Guidelines and Warnings for the QFX Series
Laser and LED Safety Guidelines and Warnings for Switches
EX Series switches, OCX1100 switches, NFX250 devices, and the XRE200 External Routing
Engine are equipped with laser transmitters, which are considered a Class 1 Laser Product
by the U.S. Food and Drug Administration and are evaluated as a Class 1 Laser Product
per EN 60825-1 requirements.
Observe the following guidelines and warnings:
• General Laser Safety Guidelines on page 338
• Class 1 Laser Product Warning on page 339
•
Class 1 LED Product Warning on page 339
•
Laser Beam Warning on page 340
General Laser Safety Guidelines
When working around ports that support optical transceivers, observe the following
safety guidelines to prevent eye injury:
• Do not look into unterminated ports or at fibers that connect to unknown sources.
• Do not examine unterminated optical ports with optical instruments.
•
Avoid direct exposure to the beam.
Copyright © 2017, Juniper Networks, Inc. 338
EX9208 Switch Hardware Guide