Juniper CTP151 Platform, Hardware Manual, Page: 89 / 104

CHAPTER 14
Maintaining Components
IN THIS CHAPTER
Required Tools for Maintaining the CTP151 Device | 83
Storing CTP Modules and Other Components | 83
Cleaning the CTP151 Platform | 84
Removing the CTP151 Device from a Rack or Cabinet | 85
Required Tools for Maintaining the CTP151 Device
You need the following tools and other items to replace platform components:
•
Flathead and Phillips screwdrivers
•
Insulated adjustable wrench
•
Antistatic wrist strap
•
Antistatic bags (or other protective packaging to hold components)
•
Plastic boots or other protective covers for fiber-optic connectors
RELATED DOCUMENTATION
Storing CTP Modules and Other Components | 83
Cleaning the CTP151 Platform | 84
Storing CTP Modules and Other Components
Retain the packaging in which a module or other component was shipped, and use this packaging to store
the item. Modules are shipped in antistatic bags and protective packaging. Components, such as transceivers,
are shipped in antistatic plastic containers within an antistatic padded box.
83