Juniper CTP151 Platform, Hardware Manual, Page: 40 / 104

Management Port Connector Pinout Information for the CTP151 Device
The 1000BASE-T RJ-45 management port on the CTP151 device uses an RJ-45 connector to connect to
a management device for out-of-band management.
Table 13 on page 31 provides the pinout information of the RJ-45 management port connector.
Table 13: RJ-45 Management Port Connector Pinouts for the CTP151 Device
Description Signal Pin
Transmit/receive data pair 1 TRP1+ 1
Transmit/receive data pair 1 TRP1– 2
Transmit/receive data pair 2 TRP2+ 3
Transmit/receive data pair 3 TRP3+ 4
Transmit/receive data pair 3 TRP3– 5
Transmit/receive data pair 2 TRP2– 6
Transmit/receive data pair 4 TRP4+ 7
Transmit/receive data pair 4 TRP4– 8
RELATED DOCUMENTATION
LED Details of CTP151 Platform | 5
Connecting a CTP151 Device to a Network for Out-of-Band Management | 65
Network Port Connector Pinout Information for a CTP151 Device
A network port on the CTP151 device uses an RJ-45 connector to connect to a device.
The port uses an autosensing RJ-45 connector to support a 10/100/1000Base-T connection.
Table 14 on page 32 provides the pinout information for the RJ-45 connector. An RJ-45 cable and RJ-45
to DB-9 adapter (p/n 720-014126) are supplied with the device.
31