Figure 9: Connect the Grounding Cable to the ACX710 Router
g100882
6. Secure the grounding cable lug with the screws.
7. Dress the grounding cable, and verify that it does not touch or block access to router components, and that it does
not drape where people could trip on it.
Step 4: Connect to Power
The ACX710 router supports a dual feed DC power supply module.
describes the DC power specifications for
ACX710 routers. For the 2-pole DC circuit breaker, the recommended maximum value is 32 A and the minimum value is
8 A.
Table 2: DC Power Specifications for ACX710 Routers
Specifications
Item
-48 V DC
Nominal input voltage
-38 V DC to -60 V DC
Input voltage range
6 A
Maximum current
150 W
Typical power consumption
225 W
Maximum power consumption
Before you begin connecting DC power to the router:
•
Ensure that you have taken the necessary precautions to prevent electrostatic discharge (ESD) damage (see Prevention
of Electrostatic Discharge Damage).
•
Ensure that you have connected the router chassis to earth ground.
8
