Juniper 5712505624227 Hardware Documentation Download Page 31 | Manualshive

Page: 31 / 64

background image

CHAPTER 4

Planning Guidelines and Safety Standards

•

Planning Guidelines for Using RingMaster to Plan a Mobility System on page 19

•

General Safety Standards and Agencies for Access Points on page 19

•

WLA Access Point Radio Frequency Exposure Guidelines on page 20

Planning Guidelines for Using RingMaster to Plan a Mobility System

The Juniper Networks Mobility System is an enterprise wireless LAN (WLAN) solution
that seamlessly integrates with an existing wired enterprise network. The Mobility System
provides secure connectivity to both wireless and wired users in large environments such
as office buildings, hospitals, and university campuses.

If you are using RingMaster software to plan your Mobility System installation, we
recommend that you create and verify a network plan for the entire installation and
generate a wireless LAN access point (WLA) work order using RingMaster before installing
the WLAs. A network plan and the WLA work order generated from RingMaster provide
the following information about WLA installation and configuration:

•

Number of WLAs required for adequate WLAN capacity in each coverage area

•

Details of installation location for each WLA

•

Settings for all WLAs in the WLAN

After you have created the plan and reviewed it, you can arrange for the WLAN installation.
System administrators and anyone involved in the installation of the WLAN system are
responsible for its proper setup and operation in accordance with all rules and regulations
of the country in which the network equipment operates.

Related

Documentation

General Safety Standards and Agencies for Access Points on page 19

•

General Safety Standards and Agencies for Access Points

For a complete list of safety warnings and detailed compliance information, see the
Juniper Networks Regulatory Guide in the Wireless LAN Services documentation at

http://www.juniper.net/techpubs/en_US/release-independent/wireless/information-produ

cts/topic-collections/wireless-lan/hardware/regulatory-info.pdf

.

19

Copyright © 2012, Juniper Networks, Inc.

«
...
29
30
31
32
33
...
»

Summary of Contents for 5712505624227

































































Reviews:

No comments

Related manuals for 5712505624227

Brand: D-Link Pages: 4

Brand: D-Link Pages: 2

Brand: Qixiang Technology Pages: 11

Brand: TRENDnet Pages: 127

Brand: Zonet Pages: 45

Brand: Sophos Pages: 4

Brand: Loopcomm Pages: 2

Brand: Caimore Pages: 83

Brand: Dell Pages: 16

Brand: Dell Pages: 5

Networking 207 Series

Brand: Dell Pages: 4

Brand: Dell Pages: 2

Brand: Dell Pages: 4

Brand: Dell Pages: 2

Brand: Dell Pages: 2

Brand: Dell Pages: 2

W-IAP270 Series

Brand: Dell Pages: 20

Brand: Dell Pages: 33

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands