Juniper 5712505624227, Hardware Documentation

Page: 23 / 64

CHAPTER 3
Technical and Mechanical Specifications
• Technical, Physical, and Radio Specifications for WLA532 Access Points on page 11
Technical, Physical, and Radio Specifications for WLA532 Access Points
This topic lists the technical, mechanical, and compliance specifications for WLA532
access points.
NOTE: For detailed compliance information, see the Juniper Networks
Regulatory Guide at:
http://www.juniper.net/
.
WARNING: In the USA, install the access point and any externally attached
antennae a minimum of 7.9 in. (20 cm) away from people. This safety warning
conforms with FCC radio frequency exposure limits for dipole antennae such
as those used in the access point.
802.11 a/b/g/n Features
The WLA532 access point supports:
•
High-performance 11-Mbps (802.11b), 54-Mbps (802.11a/g), or 450-Mbps (802.11n)
data rates
• Wi-Fi, WPA-certificated interoperability
• WFA WMM and WMM power-save UAPSD
•
WPA and WPA2 personal or enterprise with TKIP/AES
•
EAP methods such as TLS and PEAP
• Either 40-bit/104-bit WEP or 64-bit/128-bit WEP
• Seamless roaming within the IEEE 802.11 a/b/g/n Juniper Networks WLAN infrastructure
•
Adjustable output power support
•
Single autosensing 10/100/1000BASE-T Gigabit Ethernet port, configured as MDI
• Compliance with IEEE 802.3, 802.3u, and 802.3ab standards
11 Copyright © 2012, Juniper Networks, Inc.