1 | INTRODUCTION
1. Introduction
Juni offers a full turn-key solution for LTE Indoor RF repeater. This includes customer service
which is supported by Juni call center (+1 800 216 0466) and installation service. It is designed
to support SOHO and large office coverage area.
It offers quick install by providing everything needed for installation including system, donor and
coverage antennas, required cables, and installation hardware.
Designed for “Plug and Play” installation, the JL20 provides improvements to call quality and
data speed by eliminating problems such as weak and unstable receive and transmit signals in
areas where base station signals cannot penetrate – such as indoor areas, underground parking
stations and subway tunnels.
The JL20 will receive RF signals from a LTE Base Station, amplify this signal then transmit this
amplified signal to the desired coverage area. The maximum output power of the JL20 is rated at
20dBm for both the downlink and uplink paths.
The JL20 also includes a combination of AGC, ALC, and Shutdown/Recovery control circuitry
that ensure superior performance, providing consistent service in areas requiring enhanced
coverage.
The JL20 is also compatible with the Juni Web GUI software platform to allow remote access to
the LMT (Local Maintenance Terminal), providing simple, yet comprehensive monitoring and
control of the Repeater.
With the Juni Web GUI solution, the user can monitor and control the Repeater site using only a
web browser anywhere there is an internet connection. Using SNMP communication, the NOC is
also notified of specific alarms.
Repeater Operations Manual
Version 2.00
Model
: JL20
©
2011 Juni | America Inc
.