Jungheinrich KMS 100, Operating Instructions Manual

Page: 48 / 67

E 21
1298
.GB
6.4 Slack chain protection (acknowledge signal)
If the slack chain protection is activated, e.g. if the lift chain is slack or broken, all
functions are deactivated. After moving the adjusting levers to neutral position, the
cabin can be lifted by using (acknowledging) the operating switch (slack chain).
m
Before continuing with any operation the damage must be repaired.
All functions can be used again after the slack chain key went out.
6.5 Drive switch-off (
o
)
A difference is been made between drive switch-off with override or without override.
In case of drive switch-off with override, the "unlock driving" key must be pressed and
the driving lever must be operated as described under "Driving". In this way the truck
can be driven a crawling speed.
6.6 Lift switch-off (
o
)
If required by the local characteristics, the truck may be equipped for safety reasons
with automatic lift switch-off that is activated when reaching a certain lifting height.
A difference is been made between lift switch-off with override or without override.
f
If the lift switch-off is bypassed, the operator has to take special care to recognize any
obstacles when driving with the mast extended.
– The lift switch-off is bypassed by permanently pressing the pushbutton “Override
lift switch-off”.
– Inverted displaying of the lift switch-off on the display.
The pushbutton for drive switch-off and lift switch-off are located in the display.
E 21
1298
.GB
6.4 Slack chain protection (acknowledge signal)
If the slack chain protection is activated, e.g. if the lift chain is slack or broken, all
functions are deactivated. After moving the adjusting levers to neutral position, the
cabin can be lifted by using (acknowledging) the operating switch (slack chain).
m
Before continuing with any operation the damage must be repaired.
All functions can be used again after the slack chain key went out.
6.5 Drive switch-off (
o
)
A difference is been made between drive switch-off with override or without override.
In case of drive switch-off with override, the "unlock driving" key must be pressed and
the driving lever must be operated as described under "Driving". In this way the truck
can be driven a crawling speed.
6.6 Lift switch-off (
o
)
If required by the local characteristics, the truck may be equipped for safety reasons
with automatic lift switch-off that is activated when reaching a certain lifting height.
A difference is been made between lift switch-off with override or without override.
f
If the lift switch-off is bypassed, the operator has to take special care to recognize any
obstacles when driving with the mast extended.
– The lift switch-off is bypassed by permanently pressing the pushbutton “Override
lift switch-off”.
– Inverted displaying of the lift switch-off on the display.
The pushbutton for drive switch-off and lift switch-off are located in the display.