0602
.GB
E 18
6.2
Commissioning
After switching on the master switch and the key switch the LED (20) lights up steady
red also during operation.
If the keyboard is used as code switch, the control circuit switches on after entering
the correct operator code (factory-set to 2580). LED (20) now lights up steady green.
When an incorrect code has been entered, LED (20) light up red for two seconds.
After that you can enter a new code.
The travel programme (travel speed, deceleration and acceleration intensity are set)
is activated, which is indicated by the greed LEDs (22, 23,42) on key 1, 2, or 3.
Set key (21) has no function in operating
mode.
The control circuit is switched off by
actuating the
o-
key (25). To switch on
again, re-enter the code.
Switching off by
o-
key, key switch, or
automatically, if the truck is not used for a
preset time (automatic switch-off after a
period between 10 seconds and 30 minutes
can be activated in master mode).
1
2
3
4
5
6
7
8
9
0
Set
22
21
20
25
24
23
0602
.GB
E 18
6.2
Commissioning
After switching on the master switch and the key switch the LED (20) lights up steady
red also during operation.
If the keyboard is used as code switch, the control circuit switches on after entering
the correct operator code (factory-set to 2580). LED (20) now lights up steady green.
When an incorrect code has been entered, LED (20) light up red for two seconds.
After that you can enter a new code.
The travel programme (travel speed, deceleration and acceleration intensity are set)
is activated, which is indicated by the greed LEDs (22, 23,42) on key 1, 2, or 3.
Set key (21) has no function in operating
mode.
The control circuit is switched off by
actuating the
o-
key (25). To switch on
again, re-enter the code.
Switching off by
o-
key, key switch, or
automatically, if the truck is not used for a
preset time (automatic switch-off after a
period between 10 seconds and 30 minutes
can be activated in master mode).
1
2
3
4
5
6
7
8
9
0
Set
22
21
20
25
24
23
