Jungheinrich EMC 110/B 10, Operating Instructions Manual

Page: 25 / 73

E 2
060
0.GB
2 Description of the operating controls and indicators
Item Control or indicator EMC/EMB Function
1 Collision protection button
t
The truck moves away from the
operator.
2 Controller
t
Controls the direction and speed
of travel.
3 Button “Lift load lifting device”
t
For lifting the load lifting device.
4 Button “Lower load lifting
device”
t
For lowering the load lifting
device.
5 Button “Horn”
t
Triggers an acoustic signal.
6 Weighing system
o
Indicates the weight of the load
that has been picked up.
7 LED “Charging state”
t
Indicates the charging state of
the battery (see chapter D,
section 3).
8 Integrated charger
(incl. safety cut-out)
t
The battery is charged when the
mains plug is plugged into an
electric outlet.
9 Emergency stop plug
t
The circuit is interrupted, all
electrical functions are switched
off.
10 Key switch
t
For switching the control current
on and off. Removing the key
prevents the truck from being
switched on by unauthorised
persons.
11 Battery discharge monitor
t
Indicates the remaining capacity
of the battery (see chapter D,
section 5).
t
= Standard equipment
o
= Optional equipment
E 2
060
0.GB
2 Description of the operating controls and indicators
Item Control or indicator EMC/EMB Function
1 Collision protection button
t
The truck moves away from the
operator.
2 Controller
t
Controls the direction and speed
of travel.
3 Button “Lift load lifting device”
t
For lifting the load lifting device.
4 Button “Lower load lifting
device”
t
For lowering the load lifting
device.
5 Button “Horn”
t
Triggers an acoustic signal.
6 Weighing system
o
Indicates the weight of the load
that has been picked up.
7 LED “Charging state”
t
Indicates the charging state of
the battery (see chapter D,
section 3).
8 Integrated charger
(incl. safety cut-out)
t
The battery is charged when the
mains plug is plugged into an
electric outlet.
9 Emergency stop plug
t
The circuit is interrupted, all
electrical functions are switched
off.
10 Key switch
t
For switching the control current
on and off. Removing the key
prevents the truck from being
switched on by unauthorised
persons.
11 Battery discharge monitor
t
Indicates the remaining capacity
of the battery (see chapter D,
section 5).
t
= Standard equipment
o
= Optional equipment