Jungheinrich ECE 320, Operating Instructions Manual

Page: 35 / 87

04
.0
8.
GB
E 10
Travelling on inclines
M
Loads must always be carried on the end of the truck facing uphill.
Preventing the truck from rolling back:
With the controller (6) set to neutral, the service brake automatically applies after a
short jerk (the controller detects downhill motion on an incline). The service brake is
released again via the controller (6), which is also used to select the speed and the
travel direction.
Steering
Jet Pilot (
t
)
– Turn the steering arm to the left or right.
Tiller steering (
o
)
– Move the tiller to the left or right.
Z
For trucks with tiller steering, the tiller will protrude outside the geometry of the truck
around narrow bends!
04
.0
8.
GB
E 10
Travelling on inclines
M
Loads must always be carried on the end of the truck facing uphill.
Preventing the truck from rolling back:
With the controller (6) set to neutral, the service brake automatically applies after a
short jerk (the controller detects downhill motion on an incline). The service brake is
released again via the controller (6), which is also used to select the speed and the
travel direction.
Steering
Jet Pilot (
t
)
– Turn the steering arm to the left or right.
Tiller steering (
o
)
– Move the tiller to the left or right.
Z
For trucks with tiller steering, the tiller will protrude outside the geometry of the truck
around narrow bends!