Jungheinrich AMW 22, Operating Instructions Manual

Page: 47 / 112

5.3 Charging the battery
30 29 29 28
Charging the battery
Requirements
– Truck is parked securely.
– Weighing system is switched off – see page 79.
Tools and Material Required
– Charger for lithium-ion batteries (28)
Procedure
• Remove the battery (29) from the weighing system (30).
• Place the battery in the charger.
• Connect the charger to the power supply.
Z
The LED on the charger lights up red while charging is active.
• Disconnect the charger from the power supply once charging is completed.
Z
The charger switches off and the LED lights up green once charging is completed.
Z
A deep discharge of the battery can occur if it is not removed from a charger the
power supply of which has been interrupted.
• Place the battery in the weighing system.
The weighing system is ready for use again.
47
11.19 en-GB