digital audio
modular
processing system
C8000
Dolby Digital / Digtal plus / Pulse (AAC) encoder
C8612
6/20
SETUP
This bank of presets stores the encoder setup parameters from the
SETUP / ROUTING pane.
Load
[1. Meta Preset 01 … 15. Meta Preset, 16. Reversion Preset]
Will load one of the 16 available Presets from the NV memory
of the module. Select the preset of your choice and press
<LOAD NOW>.
Encoders loaded
[Encoder 1, Encoder 2, common]
from preset
Here you can see which encoder is affected by the actually loaded
preset. Since there are a few parameter which apply to both
encoders you can see if these are applied as well.
Save as #
[1 … 16]
Here you can select a Preset Number (memory location).
Name
You can give each preset a 16 character name. The actual
parameters will be stored if you press <SAVE NOW>.
Encoders to include
in preset
Here you can select which encoder will be stored in the selected
preset memory. Since there are a few parameter which apply to
both encoders you can decide if these must be stored as well.
INPUT BUS ROUTING
The module has the ability to store and recall input bus
(FROM C8000 BUS)
assignments to presets for flexible signal routing.
Load
[33. Routing reset 1 … 40. Routing Preset 8]
Will load one of the 8 available routing presets from the
NV memory of the module. Select the preset of your choice and
press <LOAD NOW>.
Save as #
[33 … 40]
Here you can select a Preset Number (memory location).
Name
You can give each preset a 16 character name. The actual
parameters will be stored if you press <SAVE NOW>.
Preset Clipboard
You can copy the data of the active parameters of the two sets of
Presets to a clip board and paste such data into the Preset
memory of another module within one frame.
Simply press <COPY TO CLIPBOARD> and the phrase :
"[c8612 "device name"] <PASTE>" will appear.
Now you can use the <PASTE> soft button on other C8012
modules within this frame to paste these presets into the modules
NV memory.
Backup Presets to File
When you press <BACKUP> an XML file that contains all preset
data will be prepared by the module. A dialog will pop up that asks
you if you want to "Open with" or "Save File". Select save file and
press <OK> to open the explorer dialog to save the file.
Restore Presets from File
When you press the <Browse…> soft button an explorer window
will pop. You may now search for an XML file of your choice that
contains the preset parameter. Press <Open> to select that file.
Finally you must press <RESTORE> to store the preset data into
the NV memory of the module.
