Visu Pro Server
11.09.2020
2 / 3
0024002603
3 Function
Intended use
-
Visualisation and operation of KNX systems via devices with HTML5 browser or app (iOS, Android), e.g. Smart
Control, smartphone, tablet, laptop, PC, etc.
-
Support of KNX IP Secure and KNX Data Secure (as of version 4.5)
-
Operation in local IP networks that support DHCP (Dynamic Host Configuration Protocol), or with fixed IP address
(IPv4)
-
Desktop device, mounting on DIN rail according to DIN EN 60715 possible
-
Max. size of the visualisation project as template in JUNG Smart Assistant
-
Connection to KNX bus via interfaces (see ref.‑no. in accessories), not included
i
Further information about this device can be found in the operation manual on our website.
Scope of delivery
- JVP Server Pro including software
-
Bracket for wall mounting or DIN rail mounting
- Operating instructions
-
Power supply incl. BS adapter (UK), EU (Europlug) and CN (China)
4 Operation
Switching the device on:
•
Press push‑button (1).
The device switches on.
The status LED lights up green.
i
After interruption of power supply device automatically switches on.
Switching the device off:
• Shut down device.
The operating system shuts down.
• Disconnect power supply.
No power supply for device.
The device is switched off.
i
In delivery state the device automatically logs on with the user name “JVP‑User”. The JVP‑User has only limited
rights and is recommended for normal operation of the visualization.
5 Information for electrically skilled persons
Fitting and electrical connection
i
Operation in living areas can cause radio interferences with other devices.
-
Visu Pro Server should not be installed near interference‑sensitive devices.
-
Installation in electric control box can prevent interferences.
Connecting and fitting the device
•
The device can be mounted on the wall or on a DIN rail acc. to DIN EN 60715 with the supplied bracket. Screw
the server onto the bracket.
• Connect the power supply.
•
Connect the LAN cable.
Setting up the server
The system has already an admin account with the password “jung” that can be used for system configurations.
In a local network the device can be operated via remote connection by means of the pre‑installed software
TeamViewer – without monitor, keyboard and mouse.
Default password: 123456
i
Change all passwords after commissioning and keep it in a safe place.
Default IP address in delivery state:
192.168.178.111 (LAN 1)
