Radio switch actuator for rail mounting
Radio Management
Radio switch actuator for rail mounting
Art.-No.: FA 14 REG
Operating instructions
1 Safety instructions
Electrical equipment may only be installed and fitted by electrically skilled persons.
Serious injuries, fire or property damage possible. Please read and follow manual fully.
Danger of electric shock. Always disconnect before carrying out work on the devise or
load. At the same time, take into account all circuit breakers that supply dangerous
voltage to the device or load.
Danger of electric shock. Device is not suitable for disconnection from supply voltage.
These instructions are an integral part of the product, and must remain with the end
customer.
2 Device components
Figure 1
(1) Switch actuator
(2) LED
(3) Programming buttons
(4) Connection terminal
3 Function
Intended use
-
Radio-controlled switching of incandescent lamps, fluorescent lamps, HV halogen lamps
and Tronic or inductive transformers with halogen lamps
-
Operation with suitable radio transmitters in combination a radio receiver RMD
-
Suitable for mixed operation up to the specified output (Technical data)
-
Installation in distribution boxes on DIN rail according to DIN EN 60715
i
It is not possible to teach a combination of presence detector and motion detector.
Product characteristics
-
Manual operation on switch actuator possible
-
4 independent switching outputs
1/4
82561013
J:0082561013
09.07.2012
