Art. No. DS 4092 TS
2.3 Fitting and electrical connection
Connecting and fitting the device
DANGER!
Electrical shock on contact with live parts in the installation environment.
Electrical shocks can be fatal.
Before working on the device, disconnect the power supply and cover up live
parts in the working environment.
The device is installed in a standard flush-mounted appliance box or in suitable flush-mounted
switch boxes. Potential-free contacts (e.g. installation switches or buttons, magnetic contacts)
can be connected optionally as required.
i
The KNX rotary sensor can be installed in various Jung flush-mounted product ranges
(series AS, A, CD, LS). For this reason, the frames and covers are design-specific. The
design elements must be ordered separately (see accessories).
i
Ideally, the device should be installed in such a way that the Status LEDs are at the top.
Figure 2: Mounting of the rotary sensor with decorative cover
(3) Slide-in shaft for rotary knob with push-button (incremental encoder)
(4) Terminals for extension inputs
(5) KNX bus connection
(6) Device with supporting plate
(7) Design frame (accessories)
(8a) Design central plate (accessories)
(8b) Design central plate with light guide for Status LED (accessories)
(9) Design control button (accessories)
o
Connect KNX bus line with terminal to bus connection (5).
o
Optionally, connect potential-free contacts to the extension inputs (4) (figure 3).
Page 7 of 143
Installation, electrical connection and operation
