Art. No. DS 4092 TS
4.2.4.2 Rotary knob (RK)
4.2.4.2.1 Rotary knob function Switching
The rotary function "Switching" allows 1-bit switching telegrams to be transmitted to the bus in
order to activate a lighting system, for example. Depending on the movement of the rotary knob
(clockwise or anticlockwise), different control commands (ON, OFF, TOGGLE) can be
transmitted to the bus via a communication object (figure 12). Alternatively, separate objects
can be assigned to both directions of rotation thereby enabling two different actuation channels
to be activated with just one operating element (figure 13).
Figure 12: Example of rotary knob function "Switching" (here: switching light)
one object for both directions of rotation
Figure 13: Example of rotary knob function "Switching" (here: switching light)
separate objects for the directions of rotation
When operating the rotary knob, a switching telegram with the command according to the ETS
configuration is already transmitted after the first notch (minimum rotation angle) depending on
the direction of rotation (figure 14).
Page 47 of 143
Software "Rotary sensor with extensions 10FE1x"
Functional description
