Art. No. DS 4092 TS
4.2.3.4 Objects Buzzer
Objects for warning/ring tone and status
Function:
Warning/ring tone
Object
h
13
Function
Warning/ring tone
Name
Buzzer - Input
Type
1-bit
DPT
1.xxx
Flag
C, W, -, (R)
1
Description
1-bit object for controlling the internal buzzer of the device for warning/ring
tone signalling.
As soon as a "1"-telegram is received, the buzzer outputs a single tone. The
signal duration can be configured in the ETS. The tone can also be switched
off before the signal duration has elapsed by receiving a "0" telegram via the
object. Each "1" telegram retriggers the tone output.
Function:
Status
Object
h
13
Function
Status
Name
Buzzer - Input
Type
1-bit
DPT
1.xxx
Flag
C, W, -, (R)
1
Description
1-bit object for controlling the internal buzzer of the device for a status signal.
As soon as a "1"-telegram is received, the buzzer outputs the configured tone
for the preset signal duration. The tone can also be switched off before the
signal duration has elapsed by receiving a "0" telegram via the status object.
Each "1" telegram retriggers the tone output.
Function:
Changing volume
Object
h
14
Function
Changing volume
Name
Buzzer - Input
Type
1-bit
DPT
1.xxx
Flag
C, W, -, (R)
1
Description
1-bit object for changing the volume of the internal buzzer of the device for
function-dependent signalling and for the warning/ring tone in two settings
(volume 1, volume 2). The telegram polarity can be configured in the ETS.
Objects for alarm function
Function:
Alarm function
Object
h
15
Function
Switching alarm
Name
Buzzer - Input
Type
1-bit
DPT
1.xxx
Flag
C, W, -, (R)
1
Description
1-bit object for the reception of an alarm signalling (polarity configurable).
1: For reading, the R-flag must be set. The last value written to the object via the bus will be
read.
Page 30 of 143
Software "Rotary sensor with extensions 10FE1x"
Object table
