Jung 3181 Series, Operating Instructions Manual

Page: 6 / 13

Standard / Universal automatic switch 1.1 m
Switching the light on manually
￭ Move the slide switch to the ON position.
Switching the light off manually
￭ Move the slide switch to the OFF position.
Switching on the Automatic operating mode
￭ Move the slide switch to the AUTO position.
Status LED
Behind the sensor window (4) there are status LEDs for indicating different states of operation
(Figure 8).
Figure 8: Status LED
YE Yellow. OFF operating mode is active.
GN Green. ON operating mode is active.
BU Blue. Movement detected (parameter-dependent) or IR reception (only for "Universal"
version).
RD Red. Programming mode is active.
6 IR remote control
Only for "Universal" version:
Function buttons IR remote control
Button Function
¿ Detection of a motion is sent for function block
1. The automatic mode is exited.
Á End of a motion is sent for function block 1.
The automatic mode is exited.
À The automatic mode is activated again for
function block 1.
The ON state is first exited after a new motion
detection.
Adjustable buttons IR remote control
Button Function
´ Increasing sensitivity
² Reducing sensitivity
³ Resetting sensitivity to presetting
Ê Function block 1: Brightness threshold 10 lx
Ë Function block 1: Brightness threshold 50 lx
6 / 13
32597033 24.07.2019
j0082597033