Jung 1790D Series Operating Instructions Manual Download Page 7

LB management

Display standard for room temperature control

Change settings with the - or + button on YES and confirm with the 

ƨ

 button.

The operating lock is active and the 

Ɨ

 icon appears in addition to the normal display.

Deactivate: Press and hold the – and 

Ƙ

 buttons simultaneously for more than one

second.

The operating lock can be activated via the same button combination that is used for de-
activating the lock.

Setting switching times

Press 

ƣ

 button.

Select memory area 

ƙ

Ʀ

 or 

Ʊ

.

Confirm with the 

ƨ

 button.

YES or No flashes in the display.

No is used to deactivate all times in the selected memory area.

The switching times of the memory areas (

ƙ

Ʀ

Ʊ

) must not overlap or be set to an

identical time. Otherwise, temperature control cannot be reliably performed.

The available memory areas are described in the table in the Default setting section.

Change selection with the – or + button and confirm with the 

ƨ

 button.

The first switching time for the comfort temperature appears in the display.

The flashing switching time can be changed with the – or + button and saved with the 

ƨ

 button.

The times for comfort and ECO temperature can be saved consecutively for the weekday blocks
Mo-Fr and Sa-Su each. 
The menu is exited upon saving the last time setting.

Set the clock - -:- - to deactivate individual switching times.

After one minute without any operation the menu is exited automatically without saving.

Set date and time

Press 

ƣ

 button.

Setting the 

ƛƜ

Confirm with the 

ƨ

 button.

The year flashes in the display.

Date, time and automatic summer time changeover can be edited as described in the
Commissioning section.

Changing temperature parameters

Press 

ƣ

 button.

Setting the 

Ʋ

Confirm with the 

ƨ

 button.

The setpoint value for the comfort temperature 

Ƶ

 flashes in the display.

Change the setpoint value with the – or + button and confirm with the 

ƨ

 button.

Use the same procedure to set the values for the ECO temperature 

ƶ

 and, if paramet-

erised, the cooling temperature 

ƾ

 as well.

Activate/deactivate optimised heating up 

ƹ

 and temperature drop detection 

Ʒ

.

Set the offset value 

Ƴ

.

After value changes, the device will start with the saved setpoint values.

Changing control parameters

Various settings are made during initial commissioning in order to adapt the temperature control
to local conditions. This menu item can be used to change the settings.

Press 

ƣ

 and 

Ƨ

 buttons simultaneously for longer than 10 seconds.

While actuating the buttons, a countdown from 9 to 0 is displayed.

7 / 10

32401503

19.05.2020

J0082401503

Summary of Contents for 1790D Series











Reviews: