7
Operation
Increasing or reducing the room temperature
￭
Press the – or + button for less than 1 second.
With every brief press of a button the target temperature changes by 0.5 °C.
The set value is retained in manual mode; in automatic mode it is retained until
the next switching time is reached.
In cooling mode the – or + buttons cannot be used to change the target tem-
perature.
If the display is switched off or has been set to indicate the actual temperature
or time, the – or + button will have to be pressed a second time or even more
before a change in the setpoint value takes place.
￭
Press the – or + button for more than 1 second.
In heating mode, the saved target temperature is retrieved:
– = ECO temperature
+ = Comfort temperature
During a detected temperature drop, changing the target temperature is not
possible.
8
Activate functions
Automatic operation/manual operation
Pressing the
Ƙ
button toggles between automatic mode and manual mode.
If all timer blocks are deactivated, the cover will automatically switch to manual
mode. Automatic mode cannot be activated.
Image 2: Target temperature indication in automatic mode
The target temperature and the
Ƙ
icon are shown in the display. Active heating is
indicated by the flashing heating icon
ƿ
. If heating is not active, the
ƿ
icon lights up
permanently. The
Ƶ
icon indicates that the system is being regulated to the
saved comfort temperature.
Image 3: Target temperature indication in manual mode
LB Management room thermostat display
8 / 14
32401513
17.08.2022
J0082401513
