Radio Management
Radio-repeater plug
Ref.-no.: 100 FR SG
Programming a detector
Remove the battery from the detector for approx. 2 min. Wait about 1 min.
after re-inserting the battery and make a movement in the detection field of
the detector within the next 10 min.
Programming a presence detector or light sensor
Remove the battery (batteries) from the transmitter for approx. 2 min. After
re-insering the battery (batteries), the transmitter will send programming
telegrams for approx. 30 s.
3. The repeater will confirm storage with the LED lighting up
permanently (Fig. H).
4. The programming mode ends automatically after about 1 min. or it
can be terminated by a short press on the programming key. The
repeater will then be in the operating mode.
Important
•
When all of the 60 memory locations are occupied one of the radio
transmitters already stored must be deleted if another one is to be
programmed.
•
When a radio channel is programmed (e. g. hand transmitter
‘Komfort’) all channels as well as the ALL-ON, ALL-OFF and the
light-scene keys will automatically be programmed at the same
time.
Deleting a radio transmitter
A radio transmitter already stored can be deleted by reprogramming the
same transmitter (see above). Successful deletion is indicated by the LED
flashing faster (Fig. I).
5
