Juna JAUX_BT-01 Installation Manual Download Page 3

3

   2.2 RECOMMENDATIONS

It is

 

recommended keep to the general safety rules and pay attention for any 

threat that can cause of damage to the vehicle. 

We advice to mount device in safety place, where it is not exposed

 

for moisture, 

water or too high temperatures. 

Device should not be installed in places where it could difficult safe driving or 
operating efficiency of other units installed in vehicle. 

The devices can be connected only to 12V. Modules can't be used in vehicles with 
24V and higher voltage. 

Please note that most of our devices are based on software that may require an 
update. That's why you should always mount the device in easily

 

available place in 

the vehicle.

 

In some countries

 

it may be necessary to check the legal provisions before 

installation and startup of the device. In the interest of high quality and development 
of our products, JUNA Electronics reserves the right to make technical changes. 

In the case of a warranty claim, the device should be sent back to the seller in 
original packaging with a detailed description of the problem with attached 
purchase invoice.

Warranty claims as well as exploitation rights expire due:

A)  Not authorized changes in devices or accessories, which have not been approved 
     or have not been provided by the manufacturer or his partners.

B)  Opening the device's box.

C)  Yourself repair the device.

D)  Improper use / improper operation of the device 

E)  Mechanical damage

F)  Flooding with water or other liquids

Summary of Contents for JAUX_BT-01






Reviews: