21
3.Other operations:
The seats installed in this machine are shock absorption seats. The seat can be adjusted back and
forth, and the back angle can also be adjusted. The adjustment device is located on the right side
of the seat (Fig.13). Before and after the adjusting lever, the movable seat can adjust the front
and rear seats. Rotate the back adjustment knob to adjust the angle of the back.
Fig.13
Waring:
1. It is forbidden to stand or sit on the machine during operation, otherwise it may
fall into the machine and cause serious personal injury accidents.
2. It is forbidden to approach rotating parts during machine operation, otherwise
personal injury may be caused.
3. When repairing the machine, the engine must be turned off to prevent personal
injury.
4. When turning, the machine must be kept at low speed. Sudden acceleration or
stepping on the brake is strictly prohibited.
5. The driver should avoid acceleration or emergency braking when turning the
machine. Turning speed with load cannot be greater than 5km / h to avoid lateral
slip or rollover.
Front and rear adjusting lever
Back adjustment knob
