3 Quick Installation
3.1 Setup hardware
•
Power off your MSX computer, if it's powered up.
•
Put a MPX
TM
cartridge into your MSX computer's empty slot.
•
Connect an audio cable to MPX
TM
and audio equipments (audio amplifier or/and
headphone).
•
Power on the MSX computer and boot with MSX-DOS(2).
3.2 Connection diagram
There are two audio output connectors and two audio input connectors. You can connect a
headphone or an external amplifier to any of output connectors. Also you can mix external audio
signals via two audio input connectors. A typical configuration is shown in Figure 1.
6/11
2017 © Jun Soft
Figure 1: connection to audio devices
