STEP 6 :
FITTING THE ENCLOSURE NETTING
You will need the following parts to complete step 6:
1 x Enclosure netting
- Part 17
Lay the enclosure netting out on the trampoline.
Enclosure
netting
15
2 x Black G3 poles
- Part 16
Find the sleeves that run along the top of the
enclosure netting.
Slot the thin sections on the two black G3 poles
into the metal ends so the poles become two long
sections.
Black G3
poles
You may need to slide the connected poles around
in the nettings sleeves until the thin black sections
are aligned with the gaps between sleeves.
The corners of the G3 rod jut out of a long cut out
section of the netting.
The zip of the door is on the long side of the
trampoline.
Stand on the trampoline and insert one of the
exposed sections of the Black G3 pole into a
plastic grip on top of one of the enclosure tubes.